Monday, December 28, 2020

Do New Trucks Require A Sprayed Bedliner?


When aiming to protect your new truck, one of the very first basic things you shouldto do is buy a durable and lasting truck bedliner. It's crucial not to let the weight of preservation rest on your paint job alone, and it's much more important to ensure you're purchasing the ideal type of bedliner.

Truck Bed 101:
Whether your bed is constructed of rolled steel, aluminum, or composite, there will be damage without proper defense. A paint task is inadequate to protect from the routine wear and tear of filling and discharging.
When your truck bed gets nicks and scratches, it exposes the metal under your paint to moisture and UV light, which results in corrosion.
Road conditions like gravel, salt, and general exposure to the elements will also speed along the rusting procedure by filling a vulnerable truck bed with much more nicks and scratches.
Carrying freight on an unlined truck bed can also lead to damage. Without the additional grip that a lining provides, there's a greater danger that your freight will damage your truck bed and also be harmed in turn.
Lining your truck bed will greatly lower the threat of corrosion and damage. It will also help keep your truck bed in excellent condition and boost your vehicle's resale value.

Which Bedliner is Best?
There are a lot of different kinds of liner choices available- from plastic drop-in liners to rubber adhesives. However, a lot of these "quick-fix" liners cause more trouble than they're worth and might result in more costs in the long run. Many liners can even be detrimental by scratching your truck bed or trapping wetness and particles between the liner and the truck.
Spray-on truck bedliners are an excellent way to protect the stability of your truck. They offer an airtight bond to the metal of your truck and keep a streamlined visual look in addition to lasting resilience. Using spray-on liner is low upkeep and economical to make certain your truck bed is protected and remains appearing like new.
Contact ArmorThane for spray-on truck bedliner solutions today!
Ensuring your truck remains in the best shape possible for the long-haul means investing in a spray-on bed liner, and ArmorThane is the around the world leader in truck bedliners and protective coatings. ArmorThane's spray-on liners have actually been established with the highest quality polyureas/polyurethanes and are long-lasting and durable. Find an ArmorThane Truck Bedliner place near you for expert installation.

Wednesday, October 7, 2020

Common Applicator Problems: SNAKES!


Copperhead Snakes in Crawl Spaces

Copperhead snakes are common in southern states.

Dealing with poisonous snakes in crawl spaces is entirely too common for spray foam and polyurea applicators in the south. Snakes can get into the smallest holes, rifts, and spaces so you should always check to see that those areas are tightly sealed. Some people use caulk for patching; nevertheless, caulk breaks down over time, and it may not be easy to fully apply it in hard-to-reach areas. Spray foam is a better option for precise sealing and a long-lasting fix. Spray foam’s expanding ability gets the foam into the tiniest cracks and other places where sealing is needed.

Homeowners can take steps to deter snakes around their homes by removing the snake’s food sources. Birdseed, dropped from bird feeders, attracts mice and rodents, a food source for snakes. Mulch can give a moist habitat and a food source for snakes because it invites insects and other small creatures. Raking up piles of mulch will help deter snakes. Some homeowners use mothballs to rid themselves of snakes; however, this has not been scientifically proven effective.

One means of capturing snakes in crawl spaces, under porches, decks, and other hard-to-reach areas, is to use a glue board. Once the snake is trapped, use a shovel to remove the glue board with the entrapped snake and move it far away from home. Pouring vegetable oil over the glue board can allow the snake to free itself. It may seem counterintuitive to free the snake, but snakes perform a good service by eating mice, rodents, and insects.

Snake handling devices, such as snake tongs, snake hooks, and a strike-proof snake bag to hold the snakes, can be used. Notwithstanding, it is prudent to train this type of work and know-how to identify various snake species. If you are uncertain, call a professional.

Working in Crawl Spaces is not for the Faint of Heart.

Unfortunately, most homeowners are unaware that snakes are lurking in their crawl spaces; therefore, the companies that work in those spaces often get a nasty surprise. While snakes are good at ridding us of mice, rodents, and insects, the nasty venomous ones can pose a problem for those who work in the dark, damp crawl spaces. While professional extermination services, snake traps, and an array of deterrent products are available, it takes time to make this happen. Crawl space workers usually don’t have time to wait out a snake, though, unless you’re an expert snake handler, it may be in everyone’s best interest to contact a professional exterminator and have the snakes removed from the area before doing any work.

Be Prepared

Home inspection organizations recommend wearing knee pads, gloves, a Tyvek polyethylene suit, goggles, hard hat, respirator with a HEPA filter, and carry a flashlight as well as a cell phone with you. Snakes and other critters can bite through bags as well as a Tyvek suit, so wearing a hazmat suit may be a better alternative. Keep in mind that some snakes can bite through leather, canvas, and denim. The highest number of snake bites usually occur on the hands and arms. Good light for crawl spaces is fundamental. This way, an inspection of the crawl space can assess possible concerns, such as architectural integrity, leaks, electrical wirework, chemicals, animal droppings, as well as critters.

What to Do in Case of a Snake Bite

In the event of a snake bite, apply pressure to the bitten area and an immobilization compress. Stay calm and still as much as feasible. Getting over-excited will cause blood to flow throughout the body more quickly, making the problem more serious. Do not wash the bite area or apply ice. Any venom residue left on the skin can help medical staff identify the snake species. Do not apply a tourniquet, cut into the wound, or try to suck out the venom. The human mouth is full of bacteria that can cause infection. Time means everything. Call 911 or your local crisis number and get help immediately. It’s always better to be safe than sorry. Crawl space workers deserve out of utmost respect and admiration. It’s a dirty and potentially dangerous job, often with numerous risks.

To learn more about potential risks and how to be prepared, we recommend calling ArmorThane. With over 30 years of experience, the go-to company comes to expertise and know-how of anything in the applicator business.

Wednesday, September 30, 2020


So you've finally decided that polyurea spray coatings are the best choice for a secondary containment system for your wastewater storage tank. Not only is the polyurea solution waterproof, but it's unyielding to outside elements. You think you can apply the coating yourself even though you've never worked with these types of chemicals before.

But as you start applying the spray foam, you realize that something is wrong. The polyurea coating is not coming out evenly, and the coating doesn't seem to be sticking very well to the surface. You're probably reasoning – "What could i be doing wrong?" or "Is my equipment broken?"

This can happen quite often, especially if you've never used poly coatings before. That's why we have technicians on staff available at all times to help our customers get the right coating the first time around.

To help you get a consistent and effective coating on your first attempt, follow these tips:

  • Preparation is key: This is the biggest reason why the customer-applied coatings fail. If you don't prepare the surface properly, then the coating will not stick very well. Before you even prepare your equipment, take a look at the surface you're about to spray. Ensure it's clean of any oils, acids, salts, and additional elements that could impact the coating. With a clean and level surface, you should have no problem applying your coating.
  • Repair the damage: Before applying the solution, you should check to ensure no cracks. If so, fill in any cracks and make sure the concrete surface isn't damaged in any way. It would help if you considered replacing any caulking sealants as well.
  • Read the instructions: You may think this is an obvious tip, but following the instructions will lead to (almost) no chance of a bad coating. If the instructions are too confusing, we advise you to give ArmorThane support a call. You need to make sure you understand the process before applying a polyurea coating. You may also want to verify your equipment and materials to ensure everything is ready for the task ahead.
  • Prepare the area: You will need to install a primer on the surface. Next, bag off and mask the area to protect against any overspray, which includes any fixtures. You may want to use wire tape to get a clean-trimmed edge.
  • Spray slowly and smoothly: A few things can happen when you're spraying, such as over-spraying or issues with the spraying-off ratio. You need to be conscious of your surroundings when applying spray foam or polyurea. For instance, on a windy day, you're going to want to spray against the wind. Make sure you're wearing the proper protective gear when spraying into the wind because the applicator will be heavily exposed to over-spraying. You should also check if the solution is blended correctly before starting to apply the solution.

If you follow those tips, then you should have no difficulty when applying your polyurea coating.

Remember, it is best to get the polyurea coating applied right the first time, so it's extremely important you are well prepared and know what you're doing. Let ArmorThane Industrial Coatings assist! Contact ArmorThane today to get more information on their products and services.

Tuesday, May 5, 2020

5 Things to Do Prior To Taking On Garage Flooring Coatings

Armor Chip Garage Epoxy Kit for Flooring | ArmorGarageBefore starting the process of applying a covering system to a garage floor, there are a few items that should be tackled. As a professional flooring covering crew, what should you be paying particular attention to?

Below are 5 important things that every specialist service provider need to carry out in order to change damaged and/or unappealing garage floors into streamlined, eye-appealing, as well as long lasting surfaces.

1. Describe the setup procedure.
Remember that consumers should be educated regarding the advantages of garage flooring finishes. That indicates that all floor covering setup experts need to completely define every action of the preparation process, give precise info regarding the top quality of the items they apply, and clarify how the extremely installment process functions. If you want your customer to select you over a few other floor covering firm, he or she have to be encouraged that your job will be durable, stain-resistant, as well as easy to maintain. Allow the client choose from a range of different shade coatings.

A real expert garage floor covering specialist should:

- arrive on-site by the prepared time;

- describe thoroughly what a garage floor finish process entails; and

- solution all the questions as well as remove all uncertainties worrying the process.

2. Do a comprehensive examination of the surface area.

Before your professional group undertakes the required preparation actions, it needs to determine the condition of the concrete surface and also see if there are any pre-existing coverings or various other garnishes. If you find out that there is a pre-existing coating, establish its kind and make use of the adequate approach to remove it. If extreme laitance (a less stable layer of cement) exists externally, it should additionally be removed. Old concrete surface areas must be structurally audio so it's important that all unhealthy areas be repaired prior to waging the layer setup.

3. Prepare the surface area for covering.
You will certainly need to safely get rid of stains and also flaws from the concrete. The preparation of concrete surface takes some time. Old floorings are seldom tidy-- they are frequently covered with oil as well as oil discolorations that have to be eliminated. Make certain that the products you utilize for elimination are eco-friendly, due to the fact that health and wellness should be the top concern on every specialist contractor's list.

Make the surface area even and also fix all the fractures, holes, as well as scratches on the surface. Remember that covering openings can spend some time before applying the garage floor layer system. Additionally, if there are any other traces of deposit or dirt, they must be eliminated since dust can terribly affect the attachment of layer. If you desire the coating/surface bonding to adhere, do not rush with this essential step!

Lastly, utilize an adequate profiling method. Depending upon the surface and the kind of layer you wish to use, you should use an adequate technique of profiling to prepare the surface. The ideal surface area prep method will certainly help to guarantee that the customer will not see indicators of fading and also peeling prematurely.

4. Action the level of wetness.
This step is extremely essential when handling concrete. Every flooring professional should understand that the true dampness condition of the surface area does disappoint the actual problem of the concrete as a whole. That's why you need to approach it with a well-confirmed technique, such as relative moisture (RH) screening. RH testing is a medically proven method that shows the specific degree of dampness that a sealed concrete will have to take care of. This method is quickly, exact, as well as economical, and also it allows the floor covering experts to decide when is the correct time to apply the garage flooring finish system. You should not take the chance of applying the finish prematurely or without the correct moisture reduction due to the fact that the wetness inside the concrete can trigger peeling, de-bonding, or blistering of the finishing.

5. Prime the surface area.
Although figuring out the suitable day for flooring may appear like an aggravation, timing usually plays a substantial duty in the outcome of applying a garage flooring finish system. The most effective time to start with the floor covering job gets on days that are neither moist neither too warm or cool. Ideal problems would certainly be at a temperature level ranging between 50 as well as 80 ° F (10.0 26.7 ° C). If you communicate the application procedure at severe temperatures outside of that range, there is always a danger of peeling, gurgling, as well as losing both your time as well as your customer's.

Top Quality
Flooring finishes are not brain surgery, but if not shared correctly, many troubles can happen. That's why you need to ensure that your company takes on the five standard steps that will increase the self-confidence of a customer to employ you and not another floor covering business.

Bear in mind that each home owner desires his or her garage flooring to be both safe as well as lovely, as well as a specialist business needs to generate perfect services for all type of circumstances. The technique is that you make the consumer see the aesthetic improvement, while you, the professional, allow the invisible protection using the top quality items and also processes.

Maintaining Your Plural Component Spray System

Troubleshooting for a Graco Reactor 2 Integrated Elite E-XP2i ...
Plural-component spray equipment can be utilized for using spray polyurethane foam (SPF), polyurea, urethanes, and epoxies. If you supply spray used services, it is necessary to do every little thing you can to maintain your plural-component devices and sprayers in good condition whatsoever times to reduce downtime and upkeep costs. Follow these 5 standards to obtain one of the most out of your tools with every passing year.
1. Examine Your Power Supply Daily
Daily, examine the voltage on your device( s). Be sure to examine coolant and oil levels also. Beginning the engine up as well as allowing it run for around five minutes will help you identify any other concerns you might not notice once you leave the generator.
Power Supply | Pinnacle West
When beginning the engine, turn on the main circuit breaker and inspect the radiator as well as compressor colder for debris. If there is debris, utilize pressed air to cleanse the parts. Evaluate the engine, compressor, as well as radiator for leaks, as well as the fuel and also coolant tubes.

Make certain to inspect the hr meter for any kind of future service( s) that might be due. You can locate the service schedule for oil, fuel, and also air filter modifications in your tools manuals. This will certainly guarantee every little thing is functioning as effectively as possible, and also it decreases the danger of damage and also downtime down the line.

A couple of basic checks daily can save you a great deal of cash on repair work in the future, and also it virtually ensures much less stress and anxiety from economic losses due to being down on the work.

2. Care for Your Hoses
Delivering more to your bottom line - New Graco Series 2 E-XP2 ...Hoses are responsible for transporting plural-component products to where they need to go. As a result, maintaining them in superior condition is crucial. To prevent your plural-component chemicals from freezing in cold weather, always bring your pipes right into the rig and hang them correctly on a hose rack. Be sure to maintain them kept and also change scuff jackets as needed. An alternative to typical scuff is making use of shielded or non-insulated items. These form-fitting items are made with a thick nylon that make them immune to tearing and also other environmental factors, while making use of Velcro to maintain them in position and also kind to the hose pipe.

When changing in between open- as well as closed-cell products, ensure you purge your B side with water so you don't infect and also lock up your whole system and the pipes, which can be pricey to repair. While you are not spraying, or if you are placing your gear away for lasting storage, be sure to flush both the An and B sides with an authorized solvent. Refraining so can force you to squander a lot of time on the following task trying to get every little thing prepped as well as prepared to go. If you have any type of questions, consult your chemical supplier or a tools professional on flushing processes, and also, as constantly, make sure to adhere to appropriate safety and security method when taking care of the products.

3. Purchase Annual Electric Motor Maintenance
If a motor is not in good working condition, your equipment can refrain from doing a lot. Having it serviced a minimum of when annually will certainly make a massive influence on your procedures. An expert in the field can take a detailed consider your system as well as identify whether new parts or repair work is needed. Be sure to utilize a devices technician who is qualified to deal with your brand name of device in order to guarantee appropriate upkeep.

Preventive maintenance checklist for centrifugal pumpsFor power sources, make sure to take your unit to a qualified solution center of the producer to ensure that all service warranties are promoted. You can go to the internet site for the producer to discover service facilities, and also your initial documentation might detail the terms of your warranty. This is a far better choice than waiting till your spray tools fails.

4. Maintain Spare Parts handy
The best option to prevent longer downtimes, in case a component of your spray machine is not functioning, is to maintain extra components available. This is a simple and also budget friendly action to take, and also it is a much better alternative than getting what you believe to be the issue at the time of failure.

Your spray gun is the component in your spray system that is more than likely to have problems. Its internal components break from usage more quickly than any other component of the spray system. Taking care of your spray gun is a bit extra tedious, but it will certainly profit your work and also company. After every job, it's important to get rid of any excess chemical from within the gun to stop build-up and clogging. It's an excellent concept to break down the weapon every now and then and also soak all the pieces in a cleansing solvent, thus removing any debris as well as cleaning the components. When rebuilding the gun, make sure to grease all the O-rings to stop them from breaking down quicker.

If you are not keeping your spray gun daily after splashing, you can end up with a great deal of issues that can cause you downtime as well as economic loss, so you want to be sure to maintain usual spare components on your spray gear in case of gun failure. Buying a back-up weapon in case the parts required are out hand is likewise a perfect means to reduce downtime on a job and also minimize troubles-- particularly if you are not currently changing the components as needed when they are failing. Transfer pump parts are other excellent extra components to continue your spray rig to ensure your system is always running.

5. Follow Service and Upkeep Schedules
Many layers specialists can agree that, as a result of the nature of their business, regular maintenance on their spray gear is typically overlooked. Lengthy days and requiring timetables can leave specialists having little to no time at all to execute regular and also preventative maintenance on their devices. Preventive and also scheduled upkeep on all tools is key to maintaining the components of your spray system running longer and without failure.

310666H Xtreme Mix 185 Repair, Plural Component Proportioner, U.S. ...
Describe each equipment supplier's standards for maintenance schedules. Tools suppliers and service technicians can also give you with precautionary maintenance to assist keep your system up and running. You ought to always describe the producers' routines for upkeep, but the complying with sample timetable will certainly give you a suggestion of what to expect:


Daily: Examine oil levels, clean air/oil external radiator, tidy cooler filter, and clean air filter.

1,000 hours: See guidebook.Air DryerDaily: Inspect that auto drainpipe is discharging.Regular monthly: Clean particles from ambient air filter, tidy with soap and water, as well as permit to dry before reinstalling.Annual: Change separator filter component.Spray Foam MakerDaily: Examine pump lubrication degree. Fill up as needed with throat seal fluid.Weekly: Grease circulation valves with suitable oil. Tidy particles out of electrical cupboard vent holes.Spray GunDaily: Grease weapon with ideal grease, drill blending chamber, and examine shutoff displays.As needed: Tidy blending chamber nozzle by involving piston security lock, usage right size drill to clean nozzle, make use of stiff bristle brush to tidy air cap, as well as clean liquid manifold, impingement components, and/or passages.Fresh Air System500 hours: Change inline outlet filter and inlet filter.DesiccantDaily: Look for shade change from blue to pink and also replace as required.

By doing daily checks, by complying with manufacturers' timetables for servicing your source of power part and compressor, by caring for your hoses, as well as by maintaining spare parts accessible, you'll have the ability to keep your plural-component sprayer at its optimum efficiency. If you ever have concerns regarding the upkeep to be carried out weekly as well as yearly, connect to your tools provider, who can give you guidelines for each and every element.